Tplancher

MOSCOW. RECONSTRUCTION OF THE PASSAGE CHANNEL AT THE KOMSOMOLSKY PROSPECT In the passageway and adjacent chambers on Komsomolsky Prospekt, a number of works were carried out to strengthen the load-bearing structures with Tp-Renewal W240 / 200 and Tp-Renewal Hi-Mod carbon fiber liners on Tp-Renewal 300 and 400 binders. Also, the entire channel on the perimeter of acrylate gel Tp-Injection AC 3100 together with the addition of Tp-Injection Pol 3000. The water-saturated seams of the adjacent channels were sealed with TPO tapes Tp-RiCoup Tape and glue Tp-RiCoup. Читать далее

MOSCOW. RECONSTRUCTION OF THE CHAMBER IN THE SEVASTOPOL PROSPECT Due to the constant influence of elevated temperatures and humidity, the slabs of the cover of the passage chamber on Sevastopol Avenue came to an emergency condition. All over the world, there was a continuous corrosion of the reinforcement, a destroyed protective layer of concrete. Locally there were cracks with active water inflows. As a restoration of the load-bearing capacity of the camera coating plates, Tp-Renewal 240/400 and Tp-Renewal Hi-Mod carbon fiber webs on Tp-Renewal 300 and 400 binders were used. Polyurethane resins Tp-Injection PU 1100 and PU 2100 were poured into the cracks for sealing. Читать далее

MOSCOW. PASSAGE CHANNEL ON THE NORTHERN BULLWARE In the passageway on the North Boulevard a complex of works was carried out to strengthen the load-bearing structures with carbon fiber canvases Tp-Renewal W240 / 400, 240/200 and Tp-Renewal Hi-Mod on Tp-Renewal 300 and 400 binders. Also, cracks with active water inflows along the channel perimeter are sealed with polyurethane resins Tp-Injection PU 1100 and 2100. Читать далее

MOSCOW, TMC "VEGAS-KUNTSEVO". CREATING OF THE DECORATIVE COATING In the TMC "Vegas-Kuntsevo" in the premises of the store "Monki" was created the decorative coating Flowcrete Kristaalina. Читать далее

TEL-AVIV. THE CURTAIN INJECTION OF THE PILE FOUNDATION During the installation of the pile foundation, the contractor accidentally drilled a waterproof layer of soil. A powerful stream of water with clay impurities, whose velocity was ~ 200 m3 / h, broke out of the borehole. To stop the water supply and fill the formed voids, a system of SPETEC PU N450 and PU H100 polyurethane resins in the complex with micro cement was injected into the ground. Resins instantly foamed and suppressed the water supply, preventing water from washing the micro cement. In turn, the micro cement has filled the voids and strengthened the soil. Читать далее

MOSCOW, B. PIROGOVSKAYA STREET. RECONSTRUCTION OF PASSAGE CHANNEL At this facility, our customers encountered complete corrosion of the reinforcement, widespread destruction of concrete and numerous fungal lesions caused by systematic filtration of water through the joints and the concrete body of the bearing structures of the canal. The bearing capacity of the coatings was restored using the external reinforcement system with materials Tp-Renewal W240 / 200, Tp-Renewal W240 / 400, Tp-Renewal Hi-Mod on binders Tp-Renewal 300 and Tp-Renewal 400; created a continuous waterproofing with injection materials Tp-Injection PU 1100, PU 2100 and AC 3100. Читать далее

ITALY. WATERPROOFING OF THE TUNNEL JOINTS In the tunnel of prefabricated concrete tubing 8 km in length, numerous leaks and infiltration of water through the seams between tubings were found, which was caused by deformation and damage to the existing waterproofing of the tunnel. The solution to this problem was the sealing of seams between tubing with SPETC PU N450 injectable polyurethane resin (~ 6 tons), which is used both in moistened and dry structures. Читать далее

MOSCOW. VOLUME ISOLATION OF THE TEMPLE OF ALL SAINT ALEKSEEVSKY MONASTERY In the basement of the Church of All Saints Alekseevsky Stauropegic Women's Monastery, due to the lack of waterproofing, most of the walls were in a constantly water-saturated state, which led to the appearance of fungus and mold on the walls. Also, during prolonged rains the basement was flooded with water coming through the joints in bearing structures. To restore the existing waterproofing, the water-saturated sections of the cellar walls were filled with acrylic gel Tp-Injection AC 3100 with addition of Tp-Injection Pol 3000. The acrilate gel with additive was pumped through the basement walls, into the ground, creating a waterproof shield throughout the area of the problem areas of the cellar. Читать далее

CHINA. RECONSTRUCTION OF THE DESTROYED SANITATION CHANNEL As a result of the clogging of the sewer pipes located above the tunnel and their subsequent breakthrough, a powerful stream of water washed away the soil above the tunnel arch. The reduction of the bearing capacity of the ground and the pressure of the roadway passing over the tunnel and the sewerage led to a partial collapse of the tunnel structures. To replace the collapsed segment, it was necessary to block the flow of water and strengthen the soil above this segment. To stop the water inflow, ~ 60 kg of SPETEC PU H100 polyurethane resin was used, then ~ 360 kg of SPETEC PU H40 polyurethane resin was used to stabilize the soil. Читать далее

MOSCOW. RECONSTRUCTION OF CHS ON NOVY ARBAT STREET The designs of the central heating station on Novy Arbat at the time of the start of work were in an emergency condition due to widespread corrosion of reinforcement in reinforced concrete elements. Also, locally there were traces of leaks and wetted surfaces of structural elements. To restore the load-bearing capacity of CHS coating plates, Tp-Renewal L carbon lamellas were used on the epoxy binder Tp-Renewal 400, as well as the tumbling reinforcement system: Tp-Renewal CFM carbon armo-mesh with wet shotcrete mortar Tp-Renewal SC-W. Читать далее

MOSCOW. WATERPROOFING OF THE UNDERGROUND PARKING ON THE MARYINA ROSCHA STREET The problem of underground parking on Maryina Roshcha was the permanent leakage of water through the joints and the body of walls and slabs of the structure as a result of damage to the existing waterproofing. The customers used Tp-RiCoup Tape TPO tapes on epoxy binder Tp-RiCoup, which were fixed on working and expansion joints, injection polyurethane resin Tp-Injection PU 2100 for filling dry cracks and Spetec PU H100 for cracks with active water inflow. Читать далее

SERPUKHOV. DEVICE FOR INDUSTRIAL FLOORS ON PRODUCTION DEPARTMENT As a result of widespread exfoliation of the existing polymer-cement coating of the fruit preparation shop, it was decided to completely replace the entire coating. As a new coating, the Flowcrete industrial coating system was used, consisting of the Hydraseal DPM moisture block barrier layer, the Protop 1000 filler and base layers, the Flowfresh MF basic cement-base polymer with a powder of quartz sand and the finishing varnish Flowfresh SR Coating. After the industrial coating was applied, the pedestrian marking with the Flowfresh SR Coating material was applied to the finishing layer. Читать далее

MOSCOW. REPAIR OF CHAINS OF BRICK WALL OF PKU "MUNKTS NAMED BY P.V.MANDRYK" WITH SPIRAL ANCHORS In the large project for the reconstruction, restoration and new construction of the clinic for premorbid and urgent conditions of the PKU "MUKTs named after P.V.Mandryk MO RF", our company took part in the repair of cracks in brickwork using the system of spiral anchors DESOI. Читать далее

MOSCOW, TMC "METROPOLIS". CREATING OF DECORATIVE COATING In the TMC "Metropolis" in the premises of the store "Monki" was created the decorative coating Flowcrete Kristaalina Читать далее