STEEL HP PACKER 13x100 MM WITH BALL-HEAD
Описание
The metal expansion packer consists of 2 parts: a screw part with a sealing expansion rubber band and a head connected to the pump hose with a suitable coupling.
The packer has 2 types of heads: ball and flat.
The length of the packer varies from 70 to 500 mm.
The outer diameter of the screw part with a rubber band varies from 10 to 17 mm.
The internal thread of the screw part is available in the versions: M5, M6, M8.
Characteristics of the packer 13x100 mm:
Inner diameter of the packer: 3,6 mm.
Internal diameter of the nipple: 1.5 mm.
Head type: ball.
Maximum working pressure: 300 bar.
Opening pressure of the nipple: from 25 bar.
Internal screw thread: M8.
Brief instructions for use: the metal screw-in packer is installed in pre-prepared holes with a diameter of 1-2 mm larger than the diameter of the packer body. Place the packer in the hole so that the expansion part of the packer protrudes slightly above the surface of the base. Screw the packer into the hole manually until it stops. Then, using a wrench, twist the packer as far as possible.
другие товары
